Slotting end mill (slot drill cutter), short – TiAIN
• Design: short
• HSS-Co8
• Type N
• 2 cutting edges
• DIN 327-D
• DIN 1835-B
• Twist angle 30°
• For the milling of keyways and feather key grooves Ø e8 for fit P9
• With centre cutting
• Sharp-edged
| EAN | Ø d = e8 | Cutting edge length | Total length | Shank Ø h6 | Materials | Coating | Steel <850 N | Steel <1000 N | INOX | Cast iron | Alu, NF metals, NF alloy | Copper, brass, bronze | Air | Without cooling | Oil | Emulsion | ME | ME_kurz |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4317784824415 | 2 mm | 4 mm | 48 mm | 6 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784824446 | 3 mm | 5 mm | 49 mm | 6 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784824477 | 4 mm | 7 mm | 51 mm | 6 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784824507 | 5 mm | 8 mm | 52 mm | 6 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784824538 | 6 mm | 8 mm | 52 mm | 6 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784824583 | 8 mm | 11 mm | 61 mm | 10 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784824620 | 10 mm | 13 mm | 63 mm | 10 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784824668 | 12 mm | 16 mm | 73 mm | 12 mm | HSS Co8 | TiAlN | 55 | 40 | 23 | 40 | 190 | 60 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |