Roughing slot drill, TiAlN-coated
• Design: short
• HSS-Co8
• Type NR
• 3 cutting edges
• DIN 844-K
• DIN 1835-B
• Rough toothed
• Twist angle 30°
• For peripheral milling and drill cutting
• Front, side and diagonal milling
• With centre cutting
• Rake angle 14°
| EAN | Ø k12 | Cutting edge length | Total length | Shank Ø h6 | Materials | Coating | Steel <850 N | Steel <1000 N | INOX | Ti, Ti alloy and special steels | Alu, NF metals, NF alloy | Copper, brass, bronze | Air | Without cooling | Oil | Emulsion | ME | ME_kurz |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4317784827423 | 6 mm | 13 mm | 57 mm | 6 mm | HSS Co8 | TiAlN | 55 | 40 | 15 | 15 | 105 | 50 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784827447 | 8 mm | 19 mm | 69 mm | 10 mm | HSS Co8 | TiAlN | 55 | 40 | 15 | 15 | 105 | 50 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784827461 | 10 mm | 22 mm | 72 mm | 10 mm | HSS Co8 | TiAlN | 55 | 40 | 15 | 15 | 105 | 50 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784827485 | 12 mm | 26 mm | 83 mm | 12 mm | HSS Co8 | TiAlN | 55 | 40 | 15 | 15 | 105 | 50 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |
| 4317784827522 | 16 mm | 32 mm | 92 mm | 16 mm | HSS Co8 | TiAlN | 55 | 40 | 15 | 15 | 105 | 50 | Suitable | Limited suitability | Suitable | Recommended | Piece | Piece |